It all started when I wove off nearly 12 yards on Wednesday to get the AVL cleared off and ready for it’s next warp. \u00a0During the last hour of that stint, my mind started drifting off to plan the next project and I wanted to do something a bit more complicated than plain weave. \u00a0In the evenings, I’d been trying to wrap my head around a technique called “Network Drafting” because the notion of adding curves and circles to color blending is something I’d like to incorporate into my work. \u00a0So, that evening, a glass of wine and my newly-reborn laptop combined to hatch a crazy plan. \u00a0One day, one scarf.<\/p>\n
The threading I adapted used all 16 shafts on the AVL and is a combined weave structure – using both plain weave and a 7-shaft satin repeat in the tie-up to weave off a network twill undulating curve. \u00a0The end result of that is a blurred circle pattern with two distinctly different faces – not unlike what is created when using turned twill – but with a more coherent structure thanks to the plain weave. \u00a0I knew that if I was happy with this adaptation I would use this for my booth, so that was all the push I needed to try and finish it over the course of the day. \u00a0Off I went.<\/p>\n
The adaptations were focused on turning a large shawl into a scarf, so I needed to adjust the number of pattern repeats and also recalculate how much warp to put on. \u00a0I also spent time ensuring that the motifs would be set on the cloth in a pleasing way along both selvedges, adjusted the thread count to fit into my warp beam sections, checked for long edge floats and determined how much to weave in order to get a finished length that would work. \u00a0That took an hour or so and then it was time to pull yarns off the shelf and get weaving. \u00a0The yarn was the only thing I didn’t change – 10\/2 cotton; in this case, organic cotton in undyed and a natural green.<\/p>\n
The loom was beamed, threaded, sleyed and ready to go by lunch time (only 200 ends, so let’s not get too excited here) so by 1:00 I was weaving. \u00a0By 3:30 I’d finished not only a short sample but also the full scarf length with hemstitching along both ends. \u00a0That meant it was cut off the loom, washed and hanging up to dry by 4:00p. \u00a0From there it was out of the house for a quick run, come back to shower and then give the scarf a hard press (also to help dry it off) so that I could wear it out to a local taping of “Wait, Wait! \u00a0Don’t Tell Me!” that night. \u00a0Consider it a trial run to make sure I liked everything about it.<\/p>\n
![\"\"](\"https:\/\/lh6.googleusercontent.com\/-l4I9A6bocRg\/U8lLugrql7I\/AAAAAAAAF5A\/y7B3n4MMOZw\/s576\/IMG_20140718_093042.jpg\")
<\/p>\n
And, it’s wonderful. \u00a0A perfect length, soft as butter and the cloth came together perfectly. \u00a0You’ll be seeing more of these if you stop by my booth on Labor Day weekend.<\/p>\n","protected":false},"excerpt":{"rendered":"
As I get more and more into designing, the process of learning seems to inevitably result in I HAVE AN IDEA AND I NEED TO MAKE THIS NOW! While this isn’t usually a big deal, when there are only (checks … Continue reading