![\"\"](\"https:\/\/lh3.googleusercontent.com\/-UgW1dwEgUqA\/VY8fVObF6hI\/AAAAAAAAJ7k\/mOS4jwzBd7k\/s640\/IMG_20150627_151016.jpg\")
<\/p>\nQuite some time ago (I’m embarrassed to admit how long ago, actually) I started putting a warp on the loom to try out some hemp singles I’d bought. \u00a0Hemp, which behaves similarly to\u00a0linen, is a different beast from what I normally\u00a0use and so I knew It’d be a good idea\u00a0to do some experimenting before starting a project. \u00a0In this case, I want to use hemp fabric for woven shibori so I set up the loom and got started weaving.<\/p>\n
First step, as always, is tying on and weaving a short header to check threading and spread the warp. \u00a0I fixed a few threading errors (rather cavalierly, I might add, but as long as I could get plain weave and something resembling my shibori pattern, it didn’t matter) and then got to weaving. \u00a0After a couple inches, I had this:<\/p>\n
<\/p>\n
Yes, the selvedges are pretty wonky, but there’s a bigger problem looming – reed marks. \u00a0For the sett I wanted, I had to put four ends in each dent of the reed. \u00a0Not a problem at all for what I’ve done in the past, but rather concerning for hemp. \u00a0You see, it’s got no elasticity at all and I didn’t know if\u00a0those reed marks would go away in the finishing. \u00a0Further, I just couldn’t beat the fabric to square. \u00a0I was two picks short per inch – not necessarily a huge problem but I really wanted a balanced fabric. \u00a0Ok, that’s two things that need addressing in the next sample.<\/p>\n
Last thing to test was the shibori. \u00a0I’ve got a new gathering thread I’m trying out (a 4\/20 cotton given to me by a friend) and I need to know not only if it’ll stand up to the gathering\/knotting process but also what it does to the final fabric. \u00a0I expect holes where the thread was after I pull it out, but until I do it, I won’t know how big the holes will be. \u00a0So, I wove off three repeats of the shibori pattern, then another couple inches, hemstitches and cut the fabric off. \u00a0And that gave me this:<\/p>\n
![\"\"](\"https:\/\/lh3.googleusercontent.com\/-4IGSBQ6f4TA\/VY804iH7WLI\/AAAAAAAAJ74\/f4wWoeRcb4M\/s640\/IMG_20150627_164218.jpg\")
<\/p>\n
There are the reed marks, in all their glory. \u00a0Also interesting – essentially ZERO draw-in. \u00a010″ in the reed, 10″ off the loom. \u00a0And, I gotta tell ya, that fabric was STIFF. \u00a0Next step, into a big bowl of hot, soapy water for a soak. \u00a0I also really worked the fabric while it was in the bowl\u00a0to try and get the threads to move and resettle as much as possible. \u00a0Scrubbing, rubbing, squeezing and overall\u00a0seriously abusing the fabric. \u00a0That done, I gave it a rinse, a hard press, another round of abuse\/pressing and out came this:<\/p>\n
![\"\"](\"https:\/\/lh3.googleusercontent.com\/-5s31is2EHQQ\/VY89njec76I\/AAAAAAAAJ9I\/tsIKPZxsZw4\/s640\/IMG_20150627_171932.jpg\")
<\/p>\n
Yes, it’s still a bit wrinkly (I rushed that last pressing) but the stunner is that the reed marks are gone. \u00a0GONE. \u00a0Ok, a teeny bit visible at the hemstitched edges, but nowhere to be found in the body of the fabric. \u00a0Here’s the proof:<\/p>\n
![\"\"](\"https:\/\/lh3.googleusercontent.com\/-awZKsCsyXfA\/VY894fZKKOI\/AAAAAAAAJ88\/uwlkE39s4kQ\/s512\/IMG_20150627_172038.jpg\")
<\/p>\n
The heavy horizontal lines are the shibori threads – but clearly, the reed marks are gone.\u00a0 Plus, the hand of the fabric is pretty amazing. \u00a0Exactly what I would expect from a fine linen fabric. \u00a0But – I think it might be a bit denser\u00a0than it needs to be, so I’m going to weave off another two\u00a0samples at looser\u00a0setts . \u00a0Same drill in the weaving, both standard fabric as well as a shibori section so that I can gauge the post-finishing holes. \u00a0And, I’ll be able to dye all of them to see how the fabric reacts to different processes. \u00a0At least one is hitting the indigo vat (once I wake it up) and I’ll also try some fiber-reactive dye.<\/p>\n
So, for the cost of about a day’s work (and I probably have another half-day to weave off the other samples), I’ve learned a bunch about how this yarn behaves on the loom (yep, tension is going to be a problem and I need to keep an eye on that), how it behaves in the finishing (don’t sweat the reed marks), and I’ll have a few different versions of the same cloth for comparison. \u00a0Cost wise, I’m probably spending about $2 in yarn, and I bought enough that I’ll still have plenty left over for my project.<\/p>\n
Sample with purpose, my friends. \u00a0Know what you want to learn, and then go learn it. \u00a0You’ll be happier in the long run.<\/p>\n","protected":false},"excerpt":{"rendered":"
Quite some time ago (I’m embarrassed to admit how long ago, actually) I started putting a warp on the loom to try out some hemp singles I’d bought. \u00a0Hemp, which behaves similarly to\u00a0linen, is a different beast from what I … Continue reading